Sand two grits in a single pass with a 37×2 Double Drum Sander. Featuring INTELLISAND® Technology and a 5 HP 220 Volt 1 phase motor, you can significantly reduce the amount of time you spend sanding.
The 37×2 Double Drum Sander features INTELLISAND® Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single phase only.
- Sanding Maximum Width (in): 37€³
- Sanding Minimum Length (in): 3-½€³
- Sanding Maximum Thickness (in): 12€³
- Sanding Minimum Thickness (in): 1/32€³
- Dimensions (H x W x D): 43€³ x 58€³ x 31€³
- Drum (Extruded Aluminum): 5€³ x 37€³
- Drum Speed: 1740 RPM
- Dust Hood (Steel Hood, Hinged At Back): (3) €“ 4€³ Vacuum ports,
- 1200 CFM minimum recommended
- Ball Bearings (1€³): 4, sealed and permanently lubricated
- Conveyor Motor: 254 in./lbs. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
- Drive Motor (TEFC): 5 HP
- Power Requirements: 208-230V, 60Hz, 1 Phase 30 Amp Service
- Shipping Dimensions (L x W x H): 62€³ x 52€³ x 45€³
- Casters Included: Yes
- Cord & Plug Included: No
