Product Description
Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND® Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding. The 25×2 Double Drum Sander features INTELLISAND® Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor.
- Sanding Maximum Width (in): 25€³
- Sanding Minimum Length (in): 3-½€³
- Sanding Maximum Thickness (in): 6€³
- Sanding Minimum Thickness (in): 1/32€³
- Dimensions (H x W x D): 43€³ x 46€³ x 31€³
- Drum (Extruded Aluminum): 5€³ x 25€³
- Drum Speed: 1740 RPM
- Dust Hood (Steel Hood, Hinged At Back): (2) 4€³ Vacuum Ports, Min CFM: 1000 Recommended
- Ball Bearing (1€³): 4 sealed and permanently lubricated
- Conveyor Motor: 100 in. -lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
- Drive Motor (TEFC): 5 HP, 1 Phase
- Power Requirements: 208-230V, 60Hz; 1 Phase, 30 Amp Service; 3 Phase 20 Amp Service
- Shipping Weight: 475 lbs
- Shipping Dimensions (L x W x H): 50€³ x 44-½€³ x 44-½€³
- Casters Included: No
- Cord & Plug Included: No
