Laguna MLAREVO 2436-220 - Revo 24|36 Lathe 220 Volt

Wall Thickness of legs on the Revo 24|36 is 80% heavier compared to the Revo 18|36.

Redesigned banjo features a more compact design, 45° cutout & wider base.

Having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.

And YES, this amazing control panel comes standard with the Revo 24|36

Features:

• Motor: Induction, 1725 RPM, 3HP, 220V, 60Hz
• Phase: 1-Phase Input, 3-Phase Output
• VFD: Delta S1 Variable Frequency Drive

Additional Features:

• Recommended Breaker Size: 30 Amp
• Remote Control Box With Speed Settings
• Two Ergonomic Control Panel Positions: High/Low
• Drive Belt: Poly-Groove With EZ Access
• Tailstock Quill: 4-½″, Engraved, Self-Ejecting
• Floor Top Spindle Center: 44-½″
• Front Bearing: TPI Taiwan 6307LLU
• Rear Bearing: TPI Taiwan 6205LLU
• Spindle Index #: 14/36/48 with Lock
• Distance Between Centers: 36″
• Headstock Through-Bore: ⅜″
• Tailstock Storage Of Centers
• Toolrest Post Size: 1″
• Spindle Size: 1-¼″ x 8 TPI RH
• Floor To Bed: 32-½″ with Pads
• Spring Loaded Spindle Lock
• Max Outboard Swing: 38″
• Swing Over Banjo: 19-¾″
• Accepts Vacuum Chuck: Yes
• Face Plate: 3″ Diameter
• Tool Rest: 12″
• Steel Bed: ASTM A36
• Headstock Spindle: MT2 Taper Hardened To 40° HRC
• Tailstock Quill: MT2 taper hardened to 40° HRC
• Swing Over Bed: 24″
• RPM High: 135-3500
• RPM Low: 50-1300
• Dimensions (W x D x H): 60″ x 26″ x 52-¼″
• Shipping Weight: 610 lbs
• Shipping Dimensions (L x W x H): 36″ x 40″ x 50″