Festool Planer HL 850 E-F-Plus

Festool

| Write a review

Festool Planer HL 850 E-F-Plus

  • SKU: FES574690
$1,000.00
Weight:
15.00 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Call Us 519-451-0100 Shop in store
  • Single knife cutter-head with spiral design with replaceable cutting knife for a smooth, quiet and “chatter-free” cut. Multiple head options to create rustic architectural effects in beams and flooring. Unlimited rabbeting depth with flush cutter side design and retractable spring-loaded guard. Rotary handle depth adjustment allows precise depth setting to 1/256" (1/10 mm) up to 9/64" (3.5 mm).
  • Using an electric planer right up to the edge or on rabbets often produces unsatisfactory results, as the machine leaves a lip that has to be removed by hand—unless you have the Festool HL 850 planer. The HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet. Because the planer head is mounted to one side, it sits flush with the opposite side of the planer housing. The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases. Planing up to the edge in deep rabbets is no longer a problem.
  • Unlimited rabbeting
  • Unlimited rabbeting depth. Interchangable Heads. Single Knife Cutter Head. Rotary Handle Depth Adjustment. MMC Electronics. Near Total Chip Extraction. Quick Blade Changes. Thumb-lock depth control
  • The planer head allows you to work right up to the edge. For different effects from distressed to hand-hewn textured effects. Spiral, metal carbide, cutter head design with replaceable cutting knife for a smooth, “chatter-free” cut. The front handle doubles as a depth control knob with a cut depth up to 3 9/64 inches. Equipped with soft-start for no-jolt starts, and constant speed under load, for consistent cutting speed and smooth results. Efficient chip extraction with left or right side mounting. For best performance use with Festool CT 22 or CT 33 dust extractors and the 36mm hose. Loosen 3 screws, replace the blade, tighten back up and that is it! The blade is self-aligning. Makes depth setting a streamlined one-hand operation so you can easily adjust your depth settings to match the resistance of the material.
  • Power consumption 850 watt; Planer shaft speed 11000 RPM
  • Includes: parallel side fence; rabbet depth stop; extraction adapter; wrench
  • Packaging: in SYSTAINER SYS 3 T-LOC

Related Products

!