Skip to main content

Jet

Jet 290784 - (SV400-115) 1/2 HP Submersible Trash Pump

  • SKU: JET290784
  • UPC: 59629839300
$999.00
Weight:
85.00 LBS
Availability:
Discontinued
Minimum Purchase:
1 unit
Shipping:
$79.00 (Fixed Shipping Cost)
  • Equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter
  • Longer power cord – standard 33' power cord
  • 304 Stainless Steel motor housing – superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water
  • Three seal motor protection - motor is protected by double mechanical seals. Lower seal made of silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber
  • More motor protection – winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on
  • Tough pump construction – hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components
  • Motor Rating : 0.5 HP
  • Max. Flow : 59 GPM
  • Max. Head : 22'
  • Pump Type : Non-Clog Vortex
  • Discharge Size : 2" NPT-M
  • Max. Submerged Depth : 65'
  • Motor Casing : 304SS
  • Pump : Cast iron volute
  • Lip Seals and O-rings : Buna-N
  • Rotor Shaft : 304SS
  • External Hardware : 304SS
  • Qty of Oil in Seal Chamber : 5.1 US oz
  • Motor Speed : 3,450 RPM
  • Motor Insulation : Class F
  • Motor Service Factor : 1.1
  • Voltage : 115 V, 1 ph-60 Hz
  • Current : F.L.A. : 6 A
  • Motor Protection : Thermal Breaker
  • Power Cord : A.W.G. 16/3; 33', STOW
  • Max. Liquid Temperature : 104° F
  • Amperes : 7.6 A